Focusrite OctoPre Dynamic MK2

Focusrite OctoPre MkII Dynamic.

This unit will provide 8 channels of high-quality Focusrite preamplifiers for you to use on microphone, line and instrument signals.

You can use the OctoPre MkII Dynamic as part of your studio set-up or live rig.

The OctoPre MkII Dynamic offers 8 direct outputs via the balanced line outputs to connect to an analogue device, or via a single or dual ADAT connection to a digital device

BACK PANEL

8 x Combo inputs for Inputs 1 – 8. Mic via XLR or Line via Jack*

8 x Line outputs (1 – 8)*

2 x Optical input sockets **

2 x Optical output sockets **

1 x BNC Word Clock input connector

1 x BNC Word Clock output connector

1 x IEC Power input socket

* Either 1/4 inch TRS (balanced) or TS (unbalanced) Jack connectors can be used.

** @ sample rates of 44.1 / 48 kHz use either output port 1 or port 2 for 8 channels – ADAT (a copy is sent to both ports)

@ sample rates of 88.2 / 96 kHz use output port 1 and 2 for 2 x 4 channels – ADAT SMUX.

FRONT PANEL

Preamp Gain and Compression Compress and More controls for Inputs 1 – 8

Separate 5 LED meter for each input channel -42, -18, -6, -3, 0 dBFS. (NOTE: Metering is post preamp and compression)

The Mic 48V Phantom Power switches with LEDs for Channels 1-4 and 5-8

Inst Instrument switch with LEDs for inputs 1 and 2

Sample Rate switch with separate LEDs for each sample rate

Clock Source switch with separate LEDs for sync source/status

AD DA Switch to route ADAT input to line outputs

Power switch with LED – LED is lit when the unit receives power and is turned on

Removable rack-ear covers – remove to install the unit into a 19-inch rack